plant machinery maintenance checklist

plant machinery maintenance checklist

16. PLANT MAINTENANCE AND REPAIR

16. PLANT MAINTENANCE AND REPAIR. The plant maintenance program is vital to consistent production of high quality feeds and no less important to cost control and assurance to the customer that their feed will arrive on time and to formula specification (Parr, 1988).


FACILITIES PREVENTATIVE MAINTENANCE PROGRAM

Every six months the Plant Operations supervisor or manager shall review the work order log for the previous 24 months to identify trends and equipment that fails or requires adjustment more f requently than the manufacturer’s recommended maintenance schedule or more frequently than other equipment of the same type.


SafetyCulture: Save Time. Save Lives.

Preventative maintenance is a proactive approach to enable regular inspections of equipment to determine if their operating condition is satisfactory. By performing preventative maintenance on equipment that is still working you can detect and correct any possible malfunction or failures before they develop into major breakdowns.


SAFE OPERATION OF MOBILE PLANT AND

Monitor and recall completed plant daily checklist (white copies) to ensure compliance and check for documents faults not reported. 3.3 Employee / Operator Only operate mobile plant and equipment that you have been trained to operate safely Perform daily inspection checklists on all mobile plant in Table -1


Plant Maintenance: Objectives, Importance and Types

(iii) Maintenance division of the factory ensures the availability of the machines, buildings and services required by other sections of the factory for the performance of their functions at optimum return on investment whether this investment be in material, machinery or personnel. Importance of Plant Maintenance:


checklist for plant inspection | RLS HUMAN CARE

Checklist for plant Workplace safety inspection checklist. Process or system checklists are used to identify common hazards and ensure compliance with standard procedures. Checklist for plant inspection. A checklist is a convenient, means of a communicating minimum acceptable levels and hazard evaluation.


Facilities Instructions, Standards, and Techniques Volume ...

FIST Facilities Instructions, Standards, and Techniques HECP Hazardous Energy Control Program Hz hertz JHA job hazard analysis MAWP maximum allowable working pressure mV millivolts NDE nondestructive examination NDT Nondestructive Testing NFPA National Fire Protection Association O&M operation and maintenance


Internal Audit Checklist of Repair & Maintenance

Aug 31, 2013· · Ensure that the preventive maintenance schedule includes all the plant machinery and equipments. · The entries is respect of actual preventive maintenance should be made in the schedule drawn along with the date / name and designation of the employee who have actually carried out the preventive maintenance .


Plant and equipment maintenance

PLANT OPERATOR DAILY SAFETY CHECKLIST: Operators are required to check the following items before commencing work. These records form the basis of a plant maintenance procedure and will be subject to random inspection. Keep record with machine at all times. OK, no obvious defect . BEFORE COMMENCING OPERATIONS CHECK M T W T F S S


Electrical Inspection Checklists - Jones & Bartlett Learning

Electrical Inspection Checklists This pdf contains 77 electrical inspection checklists taken from the 2014 Electrical Inspection Manual with Checklists. The checklists are in PDF format and can be completed electronically or printed and used as hard copy.


Preventive Maintenance of Batching Plant

Preventive maintenance is nothing but inspecting the components of batch plant and repairing or replacing them whenever necessary.To maintain batch plant in perfect condition, following aspects must be remembered. Cleanliness must be maintained in order to improve the longevity of batching plant ...


Plant hazard checklist - WorkSafe

This document provides workplaces with a checklist to keep workers safe when using machinery and equipment (plant). This includes: information on how to identify the risks associated with plant; space to answer questions about identified risks


Equipment Maintenance Checklist

Equipment Maintenance Checklist Equipment/System What to look for/What to do Daily Weekly Monthly Quarterly Annually Reference document # Steam heating high pressure Over - 15psi Caution – All steam and water discharges must be piped to a safe place. Pump and system – Check feedwater and condensate pumps for proper operation and leaky packing.


Maintenance and Repair Audit Tool

Maintenance and Repair Audit. Tool. This audit assesses the administrative issues, facility characteristics, and pre-maintenance and maintenance activities for maintenance and repair carried out at coal preparation and minerals processing facilities. …


Inspection of work equipment - Work equipment and machinery

The purpose of an inspection is to identify whether work equipment can be operated, adjusted and maintained safely – with any deterioration detected and remedied before it results in a health and safety risk. Not all work equipment needs formal inspection to ensure safety and, in many cases, a ...


Machinery and equipment repair and maintenance checklist

the height of the first step of the vehicle/truck/plant is accessible, width and tread on step are adequate, grab rails are available and there are three points of contact; for access to top of vehicle/truck/plant a scaffold, portable platform ladder, fall arrest system and/or railing on …


| Checklists |

Find Used Equipment With Used Equipment, you'll find quality options in all age and hour ranges — and at multiple price points to fit your budget. ... We offer safety and maintenance checklists, as well as detailed startup and shut-down procedures, for a number of machines, so your operators can get to work quickly and safely.


Preventive maintenance checklist for ... - Plant Services

Jul 17, 2017· In any operational atmosphere, a routine maintenance program will extend the life of a pump since well-maintained equipment lasts longer and requires fewer and less-expensive repairs. This article outlines a basic checklist for the preventive maintenance of centrifugal pumps.


Procedure Plant Management Procedure

Procedure Plant Management Procedure 1. Purpose ... Ensure appropriate maintenance of plant and equipment ... Health and safety issues must be considered for all plant and equipment. The Pre Purchase Checklist is a documented process used in consultation with operators and workers to help


Sample Maintenance Audit Report - Lifetime Reliability

Sample Maintenance Audit Report.docx Your Company Name Page 4 of 19 2.0 Executive Summary At the time of the audit we rate the maintenance performance at the operation as shown on the Plant and equipment Wellness Circle in Figure 1. Journey to Operational Excellence Figure 1 – Progress to Plant and Equipment Wellness


Maintenance Tips & Checklist - MacAllister Machinery

Establish a Heavy Equipment Maintenance Checklist. A heavy equipment maintenance checklist is highly recommended to aid in remembering tasks and ticking them off as servicing is complete. Organize check-sheets with each itemized task associated with certain intervals. That …


WHS- 41 Plant and Equipment Procedure - Territory Generation

WHS-41 Plant and Equipment Procedure Document valid for day of printing only. Printed on Tuesday, 20 October 2015. Page 3 of 12 1 Purpose The purpose of this procedure is to define the requirements for managing plant and equipment at


Maintenance & Inspection Of Plant & Equipment - Agg-Net

Inspection and maintenance of plant and equipment is a fundamental process that needs to be carried out on all plant and equipment. The Maintenance and Inspection Procedure outlines what is required in a scheme for maintenance and inspection including:


Stop Maintenance Problems with Plant Maintenance PDF Book ...

With the plant maintenance PDF handbook in your hands you get an expert’s library of maintenance and engineering know-how that lets you solve thousands of machinery reliability and equipment maintenance problems related to industrial plant maintenance, plant engineering, industrial process plant controls and instrumentation, process pumps and ...


Machinery and plant (general) checklist

Machinery and plant (general) safety checklist Check yes no n/a Maintenance Is maintenance up to date? ☐ Are records kept of commissioning and all alterations, inspections and maintenance? ☐ Operator training Is there evidence of training and instruction? ☐ ☐☐ Do operators hold relevant high risk work licences, if applicable?


Plant - WorkSafe

May 16, 2012· Machinery and equipment safety: A handbook for workplaces ... maintenance of personnel and materials hoists Earthmoving equipment - Use of vandal-proof covers: A health and safety solution ... Hiring out construction plant and equipment checklist Guidance note: Preventing falls from earthmoving equipment Cranes, hoists and winches ...


Heavy Equipment Daily Inspection Checklist

Heavy equipment should be inspected daily to prevent costly maintenance or accidents. Use this checklist to verify that your equipment is evaluated daily. As you warm up your equipment to proper running temperature, inspect these important factors. Tip: You also can use this checklist to prep equipment for long-term storage, if needed.


(PDF) Development of Equipment Maintenance Strategy for ...

Onawoga and Akinyemi [6] in their paper; "Development of Equipment Maintenance Strategy for Critical Equipment" integrated six basic factors influencing maintenance strategic developments, which ...


Chapter 3 O&M Management

• Work Control System – To control the performance of maintenance in an eficient and safe manner such that economical, safe, and reliable plant operation is optimized. • Conduct of Maintenance – To conduct maintenance in a safe and eficient manner. • Preventive Maintenance – To contribute to optimum performance and reliability of plant


Plant Equipment Maintenance - National Ready Mixed ...

Plant Equipment Maintenance ... perform maintenance on plant equipment. Daily Equipment Maintenance Log In order to keep up with all the various pieces of equipment at a ready mixed con-crete plant, a daily equipment maintenance log or checklist must be the centerpiece of any maintenance program. In some cases,


DEVELOPING AN EQUIPMENT PROGRAM

2.0 PREVENTATIVE MAINTENANCE. 2.1 Value of Preventative Maintenance ... is caused by machinery that is used improperly or designed poorly. 6-2. ... It’s very important that the air quality in a processing plant is . controlled. Air can carry mould, yeast, pathogens, moisture and dust


A Preventive Maintenance Checklist - W. W. Grainger

Preventive maintenance is defined as regularly scheduled inspections, tests, servicing, replacements, repairs and other tasks intended to help reduce the impact and frequency of equipment failures. This includes scheduled preventive maintenance, predictive maintenance and inspection activities.